Photo Source: Doc.WSBP<\/p>\n\n\n\n
SPRigWP is a new innovation in continuously reinforced concrete pavement (CRCP) with unbonded post-tensioning, produced in precast modules. This innovative product is developed by PT Waskita Beton Precast Tbk (WSBP).<\/p>\n\n\n\n
During the installation process of SPRigWP, there are openings and gaps, including gaps beneath the panel, gaps between panels, and dowel activator holes. These openings and gaps need to be closed using grouting materials.<\/p>\n\n\n\n
However, before commencing the grouting work for SPRigWP panels, several tools and materials need to be prepared.<\/p>\n\n\n\n
Sealing is used to close gaps around the panel before grouting injection to prevent material leakage. It comprises two materials are cement (with or without sand) and water.<\/p>\n\n\n\n
Mortar grout consists of a blend of Portland cement, fine aggregates (passing through sieve No.8), with or without fly ash, which the specifications according to SNI 2460:2014, and water, with the maximum water-cement ratio is 0.45, adhering to slump characteristics,slumpand the minimum required strength is 10 MPa at the specified age.<\/p>\n\n\n\n
Non-shrinkage cementitious material with a minimum compressive strength of 50 MPa at the specified age.<\/p>\n\n\n\n
It is used to clean the grouting panel area (bottom of the panel, dowel holes, inlets, gaps between panels, etc.) to ensure cleanliness, dryness, and freedom from dust and mud. The air compressor is used for cleaning the panel's bottom, while the blower is used to clean gaps between panels and holes of grouting<\/em>.<\/p>\n\n\n\n A grout mixer or colloid mixer capable of operating at various rotation speeds, from 800 rpm to 2000 rpm, and capable of thoroughly mixing approved components.<\/p>\n\n\n\n A pump equipped with a pressure gauge (not exceeding 8 kg\/cm2 or 0.78 MPa or 7.5 bar) must be capable of injecting grouting fluid into the grout holes and gaps. The injection pump should continuously pump at a minimum rate of 5.7 liters per minute.<\/p>\n\n\n\n It is used to level uneven surfaces and create grooves or paths.<\/p>\n\n\n\n It is used for drilling dead-end grouting injection holes and dowel holes.<\/p>\n\n\n\n It is used for sealing (closing gaps between SPRigWP panels and the base floor) and for smoothing the surface area of SPRigWP after grouting.<\/p>\n\n\n\n It is used as a container according to capacity needs.<\/p>\n\n\n\n Equipment used to accurately measure the volume or weight proportions of various grouting materials.<\/p>\n\n\n\n The stopwatch and flow cone must adhere to the dimensions and requirements in SNI 03-6808-2002.<\/p>\n\n\n\n The discharge line should be equipped with a positive cut-off valve at the nozzle's end and a bypass return line for grout circulation back to the storage tank or mixing tool.<\/p>","protected":false},"excerpt":{"rendered":" Sumber Foto: Doc.WSBP SPRigWP adalah suatu produk baru perkerasan kaku beton bertulang menerus (Continuously Reinforced Concrete Pavement\/CRCP) dengan Pratekan Unbounded yang dibuat dalam modul-modul pracetak. Produk SPRigWP ini merupakan inovasi dari PT Waskita Beton Precast Tbk (WSBP). Selama proses pemasangan SPRigWP terdapat lubang dan celah, di antaranya celah di bawah panel, celah antara panel, dan […]<\/p>","protected":false},"author":50,"featured_media":6729,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[99],"tags":[38],"channel":[],"keyowrds":[114],"class_list":{"0":"post-6728","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","7":"category-produk-beton","8":"tag-produk-beton","9":"keyowrds-sprigwp"},"acf":[],"yoast_head":"\n5. Mixing Paddle\/Mini Concrete Mixer<\/h2>\n\n\n\n
6. Injection Machine, Pressure Pump, and Hose<\/h2>\n\n\n\n
7. Angle Grinder<\/h2>\n\n\n\n
8. Hand Drill<\/h2>\n\n\n\n
9. Trowel and Building Trowel<\/h2>\n\n\n\n
10. Concrete Mixing Bucket or Tub<\/h2>\n\n\n\n
11. Digital Scale<\/h2>\n\n\n\n
12. Stopwatch and Flow Cone<\/h2>\n\n\n\n
13. Positive Cut-Off Valve<\/h2>\n\n\n\n